How to Understand Assessment Validation and Validate Assessments

How to Understand Assessment Validation and Validate Assessments

Blog Article

Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.

As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.

The standards require RTOs to perform two types of validation.

The primary validation type ensures compliance with the training package requirements for your RTO's assessments.

The second type of validation verifies assessments are conducted according to the principles of assessment and rules of evidence.

This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.

The Two Types of Assessment Validation Explained

The Basics of Assessment Validation

As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.

Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.

Here, we will concentrate on assessment tool validation.

How Assessment Tool Validation is Conducted

Having outlined the two types of validation, it’s time to dive into assessment tool validation.

Timing of Assessment Tool Validation

Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.

Hence, whenever new learning resources are bought, assessment tool validation should be carried out before students use them.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:

- resources get updated
- new training products are added to your scope
- course gets reviewed against training product updates
- your learning resources get identified as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.

Which Training Products Should You Validate?

Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.

Necessary Resources for Assessment Tool Validation

Academic Resources

Given that you are validating your assessment tools, you will need the complete array of your learning resources:

Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.

Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.

Validation Team

Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.

In total, your validation panel must have:

Up-to-date vocational competencies and industry skills pertinent to the unit being validated

Current knowledge and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its equivalent

Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.

While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.

Principles of Assessment Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.

A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Check?

As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.

Basic Principles of Assessment
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment yield the same results each read more time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?

Evidence Rules

Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool verify that the work is the candidate’s own?

Currency – Are the assessment tools reflective of current units of competency and contemporary industry practices?

Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.

To prevent using learning resources that do not address some unit requirements, ensure you adhere to these guidelines:

Practice Your Teachings

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Perform each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

nappy change

prepare bottles, bottle-feed babies and sanitize equipment

solid food prep and feeding babies

respond appropriately to baby signs and cues

prepare and settle infants for rest

monitor and promote age-appropriate physical exploration and gross motor skills

Having students explain the process of nappy changing for babies under 12 months old doesn’t fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.

Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

Total or Not Competent

Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?

Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What type of information can be included in a work package?

The answer might include:

Required resources

Appropriate costs

Time allocated for activities

Designated roles and responsibilities

When an assessment item calls for several answers, indicate the number of answers required from a student. This way, your assessment remains reliable, and the evidence collected is valid.

This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:

Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.

Answers can include, but are not limited to:

Weather conditions – work area isolation, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolating, use of engineering controls, administration

Structural hazards – substitution, isolation, engineering controls

Chemical hazards – isolation, use of engineering controls, administrative controls

Equipment or machinery – isolation, engineering controls, administration

Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.

Given these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” But these guarantees require waiting for an audit before rectifying noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.